The post SPG-1 Protective Bracket for YAESU FTX-1/FTX-1C | Premium Quality appeared first on .

Introducing the Yaesu FTM-310DR ASP, a powerful and feature-rich dual-band mobile radio designed for professional and enthusiast use. This compact yet robust transceiver combines advanced digital communication with real-time GPS functionality, making it ideal for mobile operations across urban, rural, and emergency environments.

Engineered with Yaesu’s renowned reliability, the FTM-310DR supports C4FM digital mode (compatible with D-STAR and DMR), as well as traditional FM analog transmission, offering versatile connectivity in both modern and legacy systems.

Description:
– The FTM-310DR series has true dual band operation capability: two independent receivers can work simultaneously in different frequency bands or within the same frequency band, supporting simultaneous reception of C4FM/C4FM (V/U, V/V, U/V, U/U). The transmission power is VHF 55W, UHF 50W, and can be switched between three levels: 55W/50W, 25W, and 5W. The heavy-duty heat sink is equipped with FACC (funnel-shaped air convection conductor) to ensure that the transmission power can work stably and reliably for a long time.
– The total audio output power is 6W, implemented by AESS (Acoustic Enhanced Speaker System): the front panel is equipped with a built-in 3W front speaker and a 3W host speaker. By adjusting the phase, output balance, and frequency characteristics of the front and rear speakers, AESS can still provide clear and high fidelity voice communication in outdoor or noisy environments.
– The full dot matrix display provides clear and accurate information, helping users efficiently grasp diverse operating states.

C4FM Digital Mode:
– C4FM is the standard format for professional communication equipment, which has better audio quality (BER: bit error rate characteristics) compared to GMSK. C4FM integrates original error correction technology for YAESU to comprehensively achieve high-quality communication.

Super-DX + ASP (Audio Digital Signal Processor):
– Super-DX can be turned on in both C4FM digital and FM analog modes to improve the sensitivity of the RF amplifier; In FM simulation mode, in addition to Super DX, ASP can also be enabled. ASP provides two modes of AUTO/MANUAL:
AUTO mode: Super DX is normally open, and ASP is automatically activated when a weak signal is detected.
MANUA mode: Press the [S-DX] key to manually switch between Super DX and ASP switches.
– Note: When ASP is enabled, the host speaker is muted, and the 3W front speaker on the control panel can still output clear and powerful audio.

PMG (Primary Memory Group):
– Up to 5 VFO or storage channel frequencies can be stored in PMG and monitored through two independent receivers. The PMG screen displays the reception status of each channel in real-time using a bar chart. You can choose between AUTO or MANUAL mode. AUTO mode automatically polls all PMG channels, can simultaneously monitor up to two channels, and supports two channels to play sound; The transmission automatically jumps to the current receiving channel. The MANUAL mode always monitors the manually selected channel and locks the transmission to that channel; The signal from another channel is displayed on the screen and can be monitored for audio.

MAG (Memory Automatic Grouping):
– Storage channels can be automatically grouped by frequency band, or registered across frequency bands according to personal needs in “My Group (M-GRP)”.

CFL (Custom Function List):
– You can register the 9 most commonly used functions from the 127 menus and enable one click access.

High Resolution Frequency Band Oscilloscope:
– Long press the [BAND] (SCOPE) key to switch between dual reception and spectrum display; The spectrum displays a maximum of 47 channels. Rotate the left knob to shift the frequency range, and the signal at the center mark will be automatically received; Rotate the knob on the right to move the marker, and you can listen to the signal at the marker in
real time and transmit it at the marker frequency at any time.

FM Friendly Digital Function – AMS (Automatic Mode Selection):
– AMS automatically determines whether the received signal is C4FM digital or FM analog, and switches to the corresponding mode.

DG-ID (Digital Group ID) and GM (Group Monitoring):
– DG-ID implements group calling with the same frequency and ID using two digit IDs (00-99); The GM function can automatically monitor the communication status with DG-ID members within the communication range.

Other Functions:
– High sensitivity 66 channel GPS receiver
– 1200/9600bps APRS data communication
– Fully supports for WiRES-X operation
– Main/sub frequency band receiving coverage of 108MHz – 550MHz
– Both the control panel and the front of the host are equipped with microphone interfaces

Specification:
– Model: FTM-310DR
– Frequency range:
Transmitting: 137 – 174MHz, 400 – 480MHz
Receiving: 108 – 550MHz
– Transmitting power:
High power: 55W (144MHz), 50W (430MHz)
Mid power: 25W
Low power: 5W
– Channel number: 1103
– Power supply voltage: DC 13.8V±15%
– Current consumption: 0.5A (receiving); 11A (55W transmitting, 144MHz); 10A (50W transmitting, 430MHz)
– Audio output: 3W for front speaker; 3W for built-in speaker; 3W for external speaker
– Working temperature: -20℃ to +60℃
– Antenna interface: SO-239 (M female)
– Antenna impedance: 50ohms
– Main unit size: 139 x 42 x 133 (excluding the fan)
– Panel size: 148 x 56 x 56mm (excluding the knob)
– Net weight: 1.2kg (including the main unit and panel)

Package Included:
– 1 x Transceiver
– 1 x SSM-85D Microphone
– 1 x Slide Rail Host Bracket
– 1 x 3-Meter Power Cable
– 1 x Spare Fuse and Screw Pack
– 1 x Handheld Mic Hook

The post Yaesu FTM-310DR ASP Dual Band Digital Mobile Radio – C4FM/FM, 144/430MHz, 55W/50W, GPS Location, UHF/VHF Car Mount Transceiver appeared first on .

The post Aluminum Alloy Foot bracket Pterosaurs Stand for YAESU FT-818ND 817ND FT-817 FT-818 HF Ham Radio appeared first on .

The YAESU FTA-750L combines tradition with innovation. Born from a history of high quality communications the FTA-750L now includes a 66 channel GPS receiver for reliable navigation. Boasting an oversize full dot matrix LCD display, the FTA-750L Airband Transceiver / GPS provides full communication on the Aircraft communications Band and additionally provides VOR and ILS navigation features on the “NAV” band, and waypoint navigation with the built in GPS receiver. The FTA-750L includes NOAA weather band monitoring and the capability of programming up to 200 memory channels with a quick and easy channel recall feature. The brand new easy to operate menu system is icon driven making it simple to navigate through all of the powerful features this transceiver / GPS has to offer. Additionally the FTA-750L can easily be reprogrammed in minutes using the optional PC Programming software and the supplied USB programming cable.

Features

• 5 Watts TX Output Power
• Huge 1.7” x 1.7” Full-Dot Matrix Display (160 x 160 dots)
• ILS Navigation Display (Localizer and Glide Slope)
• VOR Navigation Display
• Easy to operate menu system
• Integrated 66 Channel WAAS GPS receiver
• Waypoint Navigation
• GPS Position Logging
• NOAA Weather Channel Receive (U.S.A. Version Only)
• NOAA Weather Alert (U.S.A. Version Only)
• 200 Memory Channels with 15 alphanumeric characters
• Back-lit Keypad and Display
• Water Protection – IPX5 Rating
• Loud Audio (800 mW)
• High-Capacity Li-Ion Battery Pack (7.4 V 1800 mAh)
• Alkaline Battery Tray (AA x 6)

Integrated 66 Channel WAAS GPS receiver

The FTA-750L features an integrated 66 Channel WAAS GPS receiver providing the capability of quickly storing current position information as well as manually entering in waypoints for reliable navigation. When a waypoint is activated the navigation screen features a compass display with Bearing, Course over ground, distance and speed information. No moving map display.

GPS Position Logging operation

The FTA-750L includes a GPS Logging feature when activated automatically stores your position information at preset intervals. This is a great feature when backtracking is necessary.

ILS (Localizer & Glide Slope) and VOR Navigation

When the FTA-750L receives a VOR signal the display will automatically switch to the Navigation band screen, with CDI (Course Deviation Indicator) based on the received VOR signal.

Huge Dot Matrix LCD display

The FTA-750L features a huge 1.7″ x 1.7″ full dot matrix LCD display with full backlight and dimmer. The high resolution display makes it easier to view all the great features the FTA-750L has to offer.

200 Channel Memory bank

The FTA-750L can store up to 200 Memory channels for quick and easy retrieval. With the capability of using up to 15 Alphanumeric characters per name the FTA-550 allows for a better channel description.

In the box:

• Headset adapter
• Yaesu 750L radio
• Antenna
• Rechargable Li-ion battery
• Wall charger
• Cigarette lighter charger
• Desktop cradle
• USB programming cable
• Alkaline battery tray
• User manual

The post Yaesu FTA 750L NAV/COM Aviation Radio appeared first on .

The post Yaesu FTA-550L appeared first on .

Features:

• Floating / Submersible IPX7 Waterproof rating (3.3 feet or 1 meter for 30 minutes)
• All USA, International and Canadian channels
• Selectable 6W / 2.5W / 1W output power
• Receive WX and FM radio bands 76MHz to 108MHz
• High resolution dot matrix LCD display
• E2O Easy to Operate Menu system
• Programmable function keys
• Speaker mic Jack
• High capacity 1850 mAh Li-Ion battery
• 3 hour desktop rapid charger
• 12VDC and 110VAC charging cables and charging cradle included
• 3 year waterproof warranty

The post YAESU HX210 HX210E VHF Marine floating handheld radio IPX7 Waterproof transceiver with Standard Horizon SBR-23Li walkie talkie battery appeared first on .

The post YAESU FTA-450L Aviation Handheld Radio 1.7-inch Large Screen 5W Power Radio appeared first on .

YAESU FC-40 AUTOMATIC ANTENNA TUNER FT-857/FT-897(Long Wire Antenna)

The FC-40 is a new, wide-range Antenna Coupler for the FT-450, FT-857, and FT-897 Series of Transceivers.

The FC-40 is a microprocessor-controlled antenna impedance matching network designed for use with all versions (original and “D”) of the FT-450, FT-857, and FT-897 HF/VHF/UHF Transceivers. The FC-40 makes use of control circuitry inside the transceiver, allowing the operator to monitor and control operation of the FC-40, which mounts near the antenna feed point. Fully waterproof, the FC-40 may be mounted outdoors in exposed locations, and will handle a 100 Watts of transmitter power.

The FC-40 is designed for operation on 7 ~ 54 MHz, when using an 8′ whip like the YAESU YA-007, or on 1.8 ~ 54 MHz when used with a random-length wire longer than 66′. Matching time is typically five seconds or less, and the required drive power is 4 ~ 60 Watts. The FC-40 sports a whopping 200 match-setting-point memories, for instant recall of the tuning settings.

Specifications:

Operating Frequency Range: 

1.6 – 54 MHz with 20+m end-fed wire

7 – 54 MHz with YA-007 HF 2.5 m Mobile Whip Antenna

Input Impedance:

50 Ohms

Maximum Input Power:

100W (3 minutes maximum continuous TX)

Matched SWR:

2.0:1 or less

Tune-up Power:

4 – 60W

Tune-up Time:

8 seconds maximum

Impedance Matching Memories:

200 Channels

Power Supply:

13.8V DC (supplied from transceiver)

Case Size (WHD):

9″ x 7″ x 2.1″ (228 x 175 x 55 mm)

Weight:

2.6lbs. (1.2kg)

   

The FC-40 makes use of the control circuitry built into the transceiver, which allows the operator to control and monitor automatic operation of the FC-40, which mounts near the antenna feedpoint. The FC-40 uses specially -selected, themially-stable components, and is housed in a waterproof case to withstand severe environmental conditions with high reliability.

A carefully-chosen combination of solid-state switching components and high-speed relays allows the FC-40 to match a wide variety of antennas to within a 2:1 SWR on 1.6 – 54 MHz, typically in less than eight seconds. Transmitter power required for matching may be as little as 4 – 60 Watts, and matching settings are automatically stored in memory for instant recall when the same frequency range is selected later. The FC-40 is a current feed design and may not be able to match frequencies that are near 1/2 wavelength (or multiple) of the antenna element.

The post YAESU FC-40 AUTOMATIC ANTENNA TUNER FT-857/FT-897(Long Wire Antenna) appeared first on .

Describe:

FT-891 inherits the classic design of YAUSE transceiver once again. It has a solid and compact shell, and weighs only 1.9KG. It can provide excellent performance for portable and daily amateur radio operations. It can be equipped with a safety case or a backpack to take it out as a field device. Table is a good choice.

The FT-891 provides a reliable power output of up to 100 watts. The well-designed transmitter circuit is equipped with efficient internal dual fans to achieve constant temperature control. The die-cast base fully guarantees high reliability.

High-performance IF DSP, IF DSP adopts Texas Instruments 32-bit high-speed floating-point processor, which is optimized for high-performance audio applications. Yaesu’s own DSP, QRM and noise suppression functions can effectively reduce common random noise on shortwave.

The standard 3kHz roofing filter and 3kHz narrowband roofing filter are mainly used in very frequent frequency bands during competitions, which can significantly weaken strong interference signals outside the frequency band. The three-time frequency conversion is matched with a temperature-compensated crystal of the first-level intermediate frequency, which can provide high-frequency stability of ±0.5ppm even in the operating environment of -10°C~+50°C.

With the detachable panel design, the radio host and control panel can be separated with one button. Using the YSK-891 separation kit, the radio can be flexibly installed in the small space of the car and enjoy the fun of mobile communication. (YSK-891 separation kit needs to be purchased separately)

Exclusive automatic antenna tuner, optional automatic antenna tuner FC-50 specially designed for FT-891, has a large-capacity storage unit, can record tuning data of 100 channels, small and beautiful in appearance, suitable for stacking two machines , collocation with FT-891 can greatly improve the communication effect. (FC-50 Antenna Tuner needs to be purchased separately)

Technical Parameters

Transmission power:
100W (SSB/CW/FM)
40W (AM carrier)

Frequency Range:
Transmit: 1.8-54MHz (applicable to amateur band)
Reception: 30kHz-56MHz (the index guarantee range is only applicable to the amateur band)

Working current: 2.0A (with signal reception), 23A (100W transmission)

Transmission mode: A1A(CW), A3E(AM), J3E(LSB, USB), F3E(FM)

Frequency stability: SSB/CW/AM: ±0.5ppm (-10℃~50℃), FM: ±1kHz (-10℃~50℃)

Frequency step: 2/5/10Hz (CW, SSB), 10/100Hz (AM, FM)

Rated voltage: 13.8V DC (±15%), negative ground

Audio power rating: 2.5W/4Ω 10% THD

Working temperature: -10℃~+50℃

Antenna interface: M type

Antenna impedance: 50Ω, unbalanced

Appearance size: 155*52*218mm (excluding knobs and connectors)

Machine weight: about 1.9kg

The post YAESU Original New FT-891 HF/50MHz Full Mode Car Vehicle Transceiver 100W high-powered HAM Mobile Shortwave Radio Station appeared first on .

Yaesu FTA-850L NAV-COM aviation transceiver air band vhf handheld radio walkie talkie

Parameters:
Frequency range:
1)Transmission: 118,000-136,9916 MHz
2)Receiving:
108,000-136,9916 MHz
161.650-163.275 MHz
329,150-335.000MHz

Spatial channel: 25KHz, 8,33KHz
Type of Issue:
TX: AM
RX:AM and FM (FM: to receive weather channels)
Supply voltage: 6,0-9,5 VDC
Temperature: -10°C to + 60°C
Product size: L60xA132xP34mm
Product weight: 395g
Transmitter power: 6W (PEP), 1.8 (carrier power)
Battery capacity: 2200mAh

LF:
47,25 MHz (VHF)
46.35 MHz (UHF) and 450kHz
Circuit type: Superheterodine double frequency
Spurial emission: 70dB below carrier
Microphone impedance: 150Ω

Description:
This one adopts 2.4 inch color TFT large screen, which has excellent visibility and experienced operation.

Supports ILS navigation display (locator and tilt sliding). When this one receives ILS signal, the visor automatically switches to a navigation screen, which displays the CDI (course deviation indicator) according to the received locator signal or the sliding tilt signal. Course and altitude deviations are clearly displayed without color CDI display and assist landing in adverse weather conditions.

VOR navigation display, when this one receives VOR signal, a display automatically switches to a NAV band screen and displays the CDI. The top of the compass rose always indicates the starting point direction of the OBS.SOG (ground speed). Note: It will only be displayed when an internal GPS unit is activated and a position is obtained.

A flight route navigation function clearly displays a driving route, list the waypoints from the starting point to the final destination, including a current position where a navigation is performed. A route, a position and a status of the trip are clear at first glance.

It has built-in Bluetooth module, allowing it to be operated with commercially available Bluetooth headphones or used with the optional Yaesu accessory.

With IPX5 waterproof rating and MIL-STD-810H certified rugged construction, it can easily handle even outdoor but demanding environments.

The post Yaesu FTA-850L NAV-COM aviation transceiver air band vhf handheld radio walkie talkie appeared first on .