Main Features
• 1.77″ large screen,full keyboard,fully open menu operation
• Scanner function:VFO scan range setting,three scan recovery methods,channel scan,CTC/DCS scan,scan channel addition and removal
• Built-in input method,allows this device to edit channel name
• Frequency step,selectable between 2.5K|5.0K|6.25K|10.0K| 12.5K| 20.0K| 25.0K| 50.0K
• Four-band handheld transceiver
FM:65-108mhz
VHF:136-174MHZ
VHF:220-260MHZ
UHF:400-520MHZ
• DTMF encoder and DTMF manual dial
• High Capacity Li-ion battery
• Broadcast FM radio receiver 65-108 MHz
• 50 CTCSS tones and 105 DCS codes
• VOX (voice activated transmit)
• 10 zones storage,Up to 999 named memory channels
• Alarm function
• High or low power selectable
• Display illumination programmable via keypad
• Function beep on the keyboard
• Dual watch/Dual reception
• Programmable repeater offset
• Battery saving function
• Transmission time-out timer
• Scan mode
• Busy channel lock out
• Built in CTCSS/DCS tones
• PC programmable
• Ten (10) levels of Squelch adjustment
• Cross band reception
• End of transmission tone, aka “Roger Beep”
• ANI
• Keypad lock
• Two (2) pins for Kenwood accessory port
• Desktop charging or Type-c Charging

Technical Parameters

General
Channel Capacity:  999
Channel Spacing:  25.0KHz/12.5KHz
Input Voltage:  7.4 V
Battery Life:  About 15 hours
Frequency Stability:  ±2.5ppm
Operated Temperature:  -10°c-+60°c
Antenna Impedance:  50Ω
Weight (with battery/antenna):  298g

Receiver
Sensitivity : -120dBm
Intermodulation and Rejection:  ≥62dBm
Adjacent Channel Selectivity:  ≥65dBm
FM Noise:  45dB/40dB
Audio Power Output:  1000mW
Audio Distortion:  ≤5%

Transmitter
RF Power Output: <5W
Modulation:  16K0F3E@25KHZ /11K0F3E@12.5KHZ
Spurious Emission: -16dBm＜1GHZ,16dBm＞1GHZ
FM Noise:  -40dB
Audio Distortion:  ≤5%

Package Includes:

1 x Radio
1 x Battery
1 x Antenna
1 x Charger
1 x Belt Clip
1 x Strap
1 x User Manual

(Other Accessories depend on your choice)